Extremely easy to install, but watch the quick video below for a few tips:
Installing the Sentry Stickers
- Choose where the sticker goes: the front quarter window, alongside the A-pillar. It sits clear of your line of sight.
- If the glass is dirty, clean it first. The included alcohol wipe is a prep wipe, not a general cleaner.
- Wipe the target area on the glass with an alcohol wipe and let it dry.
- Peel the backing off the sticker.
- Float the sticker into position on the glass without pressing it down. Line the top edge up against the top line of the glass, and line the side up against the adjacent line.
- If the alignment is off, peel the sticker back and try again. Don't take too long doing this.
- Once the sticker is where you want it, press it down and work across it with the included squeegee to push out any bubbles.
