Xpel Armor for Lower Door Panels

Please watch the quick video below:

Here's an AI-generated summary guide:

1. Gather Materials:
2. • Xpel Armor protection kit for lower door panels
   • Isopropyl alcohol (not included)
   • Squeegee
   • Optional: Kneeling pad (if your knees have seen better days)
2. Prepare the Area:
3. • Clean the door panels with isopropyl alcohol to remove any trim enhancer or other residue.
   • If installing in cold weather, consider warming up the Xpel Armor slightly with a hairdryer.
3. Install on Front Doors:
4. • Align: Identify the key alignment points on the Xpel Armor piece (top and bottom).
   • Position: Carefully position the Xpel Armor on the door panel, aligning it with the marked points.
   • Secure: Gently press the top edge of the Xpel Armor into place.
   • Smooth: Use the squeegee to smooth out any air bubbles or wrinkles, working from the center outwards.
   • Roll: Use the palm of your hand to gently roll the Xpel Armor over any curved edges to ensure a smooth, tight fit.
   • Repeat: Follow the same steps for the other front door.
4. Install on Rear Doors:
5. • Access: Open the rear doors to a 90-degree angle for easier access.
   • Clean: Clean the rear door panels with isopropyl alcohol.
   • Align: Identify the key alignment points on the Xpel Armor piece (top and bottom).
   • Position: Carefully position the Xpel Armor on the door panel, aligning it with the marked points.
   • Secure: Gently press the top edge of the Xpel Armor into place.
   • Smooth: Use the squeegee to smooth out any air bubbles or wrinkles, working from the center outwards.
   • Roll: Use the palm of your hand to gently roll the Xpel Armor over any curved edges to ensure a smooth, tight fit.
   • Repeat: Follow the same steps for the other rear door.
5. Final Checks:
6. • Inspect the installed Xpel Armor for any remaining air bubbles or wrinkles. If found, gently peel back the affected area and re-smooth with the squeegee.

Additional Tips:

• If installing in cold weather, consider warming up the Xpel Armor slightly with a hairdryer.
• Use a kneeling pad for added comfort during installation.
• Take your time and work carefully to ensure a professional-looking installation.