Installing your puddle lights should only take a few minutes. Please watch the video below to learn how!
Important note: If you need to remove the puddle lights for any reason, then please follow these directions:
- Pry the bulb out with a spudger, or other plastic pry that won't injure the lens or your door trim
- It'll come out as far as the black housing, which due to the projection unit is very slightly wider than the opening. To now remove the bulb completely, just hold it by the long sides, and wiggle and pull down. Don't hold it by the short sides, as there's a change the clear lens will come away, as the retention clips are at each short end.
- To remove the power cable, there's a small black clip on the top of the inserted clip, just push down on that to release it from the bulb