Proud of what you drive? Lost your letters? Never had any letters? Choose whatever you need from our OEM-quality letters, or select one of the pre-built popular combinations.
All the letters are the same height, at 17mm, or about 2/3". Mounted with 3M tape, they feature an easy-pull tab to avoid the frustration normally associated with trying to remove the protective film.
P3D, P3D+ AND PYD+ ship with an installation template to make alignment a breeze! Simply choose your preferred location, use the cleaning pads to clean the area and apply the template (ensuring it's level). Position the letters, first by applying just gentle pressure. Step back, make sure everything is perfectly positioned, then apply firmer pressure, and remove the template.
For other letter options, we recommend first applying a piece of masking/painters tape to where you intend to apply them to your Tesla, this ensures you'll be able to get a level application. Then get another piece of tape and after removing the protective backing place each letter face-down on the tape so you can pre-space everything, and ensure you're happy with alignment. Once you're satisfied, just present the letters to your car, and touch lightly so they stay in place, but you can still remove them if needed. Take one last look to confirm you're happy with positioning, then apply more pressure to finalize the installation. It's best to avoid temperature extremes for the next 24hrs to allow the adhesion to fully take.
If you need to remove them for any reason, just take a piece of fishing line or dental floss, and side behind the letter to break the bond and remove it. If needed, apply a little heat with a hairdryer to soften the adhesive, and make the removal easier.