These are very simple to install, but please watch the 2 minute video below to ensure it goes perfectly for you!
Below are AI-generated instructions to help our bot answer questions ๐ค
- Remove the cover: Remove the cover with the Cybertruck graffiti logo buy pulling on the lower edge. Use the trim tool if needed.
- Position the hooks:ย Align the frunk hooks with the bolt holes behind the access panel. Now apply the adhesion promotor to each location, and allow to dry for at least 5 minutes (but no longer than 20)
- Secure the hooks:ย Place the frunk hooks to the frunk lid. Apply pressure for 10 seconds to ensure a good bond
- Test the installation:ย Gently pull on the hooks to verify they are firmly attached. Ensure they can hold the weight you intend to hang from them.
- Final inspection:ย Re-install the cover, using the flat of your hand to ensure it's fully clipped in.
